Starting The Engine; Adjusting The Handle Height; Using The Self-Propel Drive - Toro 20090 Operator's Manual

Note: To raise the mower, move all 4 cutting height
levers forward; to lower the mower, move them all
rearward (Figure 11).

Adjusting the Handle Height

You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 12).
1. Handle lock
Figure 11
Figure 12
2. Handle positions

Starting the Engine

1. Pull the blade control bar to the handle (Figure 13).
1. Hand-push models only
2. Pull the recoil start handle (Figure 14).
1. Hand-push models only
Note: If the mower does not start, contact an
Authorized Service Dealer.

Using the Self-propel Drive

Self-propel models only
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 15).
8
Figure 13
2. Self-propel models only
Figure 14
2. Self-propel models only
Figure 15