Time/Outdoor Temperature Projection: The projection will alternate
between time and outdoor temperature every 5 seconds. This is not
adjustable.
Note:
On AC power the projection will be on constantly and alternate
between time and outdoor temperature (unless turned to OFF).
Using battery power, the projection and backlight will come on for
10 seconds when SNOOZE/LIGHT is pressed.
Mount the outdoor sensor on a North-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
The maximum transmitting range to the atomic projection alarm is
over 300-feet (91 meters) in open air, not including walls.
Hold the +/TEMP button for 3 seconds to search for the outdoor
sensor .
The projection alarm has a wide base to sit on a desk or table.
Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can prevent
signal reception.
Position near an exterior wall that faces Ft. Collins Colorado for
WWVB time signal reception.
Place within 300 ft. (91 meters) of the outdoor sensor.
Obstacles such as walls, windows, stucco, concrete and large
metal objects can reduce the range.
Be aware of electrical wires and plumbing within a wall. This will
interfere with RF (radio frequency) signal reception.
Model 616-143
POSITION OUTDOOR SENSOR
SEARCH FOR OUTDOOR SENSOR
POSITION PROJECTION ALARM
www.lacrossetechnology.com/support
Outdoor Sensor
Reception icon
Page | 5