Network Settings; Basic Network Settings - Pyle PIPCAM5 User Manual

3.1.4 Restore Factory Settings
Click Restore Factory Settings, will pop-up a prompt, select OK, all the parameter will be returned to factory
settings, and the device will reboot.
3.1.5 Reboot Device
Click Reboot the device, will pop-up a prompt, select OK, then the device will reboot

3.2 Network Settings

Click Network, will pop-up the prompt as below:

3.3 Basic Network Settings

Here you can fix the camera's IP address; means set the static IP address of camera manually.
You can also do the same settings from IP Camera Tool. (Figure 2.3)
More Security ,More Convenience
Figure 5.5
Figure 5.6
- 26
-