Hands-Free Mode Settings; Power Saving Mode Settings - Samsung Galaxy S 4 User Manual

Hands-Free Mode Settings

Configure settings for using your phone without touching it, such as announcing incoming calls
and reading out messages.
1. Press and tap
2. Tap Hands-free mode, and then tap the ON/OFF switch beside Hands-free mode to
turn the feature On or Off.
3. After you turn the feature On, you can configure options:

Incoming call: When enabled, your phone reads out the caller's information when
you receive a call.

Air call-accept: When enabled, you can wave your hand over the screen to accept
incoming calls.

Message: When enabled, your phone reads out the sender's information when you
receive a message.

Alarm: When enabled, your phone reads out alarm information when an alarm
sounds.

Schedule: When enabled, your phone reads out event information when a reminder
sounds.

Power Saving Mode Settings

Configure Power saving mode settings to conserve battery power.
1. Press and tap
2. Tap Power saving mode to configure options:

Tap the ON/OFF switch next to Power saving mode to turn the mode On or Off.
Power saving mode must be turned On to configure settings.

CPU power saving: When enabled, the maximum performance of the device's CPU
(Central Processing Unit) is disabled to conserve battery power. Tap the check box
beside the option to enable or disable it.

Screen power saving: When enabled, the frame refresh rate and brightness level
are reduced to conserve power. Tap the check box beside the option to enable or
disable it.

Turn off haptic feedback: When enabled, Haptic feedback is disabled to conserve
battery power. Tap the check box beside the option to enable or disable it.
Note: Tap Learn about power saving to view information about these settings.
Settings
> Settings > My Device.
> Settings > My Device.
170