Panasonic TH-L32DT30A Operating Instructions Manual page 27

Charging the 3D Eyewear (optional - rechargeable type)
To charge when the TV is in the Standby mode
MENU
TV
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to "OFF"
2. Connect as shown above , and turn on the television power
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable
1. Display the menu
MENU
"How to Use the Menu Functions" (p. 32)
2. Select [Setup]
3. Select [Other Settings]
Other Settings Access
4. Select [USB Charge in Standby] and set [On]
Other Settings
Off
USB Charge in Standby
On
Power Save
Region Select
Daylight Saving Time
5. Turn off the television power, and set
the 3D Eyewear power switch to "OFF"
6. Connect as shown
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete.
(Approximately 2 hours required)
7. Remove the charging cable.
select
2/2
access
select
[USB Charge
in Standby]
access
USB connector
Mini USB connector
select
[On]
store
27