Printing From Mobile Phone Via Bluetooth Communication - Canon MX450 series Online Manual

Printing from Mobile Phone via Bluetooth Communication

This section describes the procedure to print photos through Bluetooth communication from a mobile
phone with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your mobile phone's
instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to
Communication.
Note
Mobile phones supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can be used to
print photos.
Depending on your mobile phone, you may not perform printing even if your mobile phone supports
the profiles above. For information on the profiles your mobile phone supports, refer to your mobile
phone's instruction manual.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Load paper.
Loading Paper
3. Attach the optional Bluetooth Unit BU-30.
Insert the Bluetooth Unit BU-30 into the USB flash drive port.
4. Specify the setting of page size and media type and so on.
1. Press the Setup button.
The Setup menu screen is displayed.
2. Use the
3. Use the
For details on the print setting:
Mob. phone settings
5. Start printing from a mobile phone.
• For the device name, select the default value "Canon XXX-1" (where "XXX" is your machine's
name).
• If you are required to input a passkey, input the default value "0000".
button to select Device settings, then press the OK button.
button to select Mob. phone settings, then press the OK button.
About Bluetooth