Canon MX450 series Online Manual page 107

Hide thumbs Also See for MX450 series:
Table of Contents

Advertisement

2. Use the
3. Select the layout, then press the OK button.
Select the layout from Layout 1, Layout 2, Layout 3, or Layout 4.
Note
The * (asterisk) on the LCD indicates the current setting.
8.
Load the original document on the platen glass or in the ADF.
Loading Originals
9.
Use the
(-)
copies.
Change the print settings as necessary.
Setting Items
10.
Press the Color button for color copying, or the Black button for black & white
copying.
When the document has been loaded on the platen glass:
When the machine finishes scanning each sheet from the first to the third document, the
message below is displayed.
If you have the next sheet of document to scan, load it on the platen glass and press the
OK button. The machine starts copying.
If you do not need more scanning, press the tone button to start copying. The machine
starts copying.
Note
You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
When the document has been loaded in the ADF:
The machine starts scanning the next sheet of document automatically after one sheet of
document finishes being scanned.
Note
If Memory is full appears on the LCD when scanning, set the image quality to Standard or
reduce the number of sheets of documents, then try copying again. If the problem is not
resolved, set the image quality to Fast and try copying again.
button to select 4-on-1 layout, then press the OK button.
(+) button or the Numeric buttons to specify the number of

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents