Remote Control; Source; Mute; Repeat - Samsung HW-J470 User Manual

REMOTE CONTROL

● ● Soundbar is a Samsung proprietary name.
● ● Operate the TV using the TV's remote control.

SOURCE

Press to select a source connected to the Soundbar.

Mute

You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.

Repeat

Press to set the Repeat function during music playback from a USB device.
OFF - REPEAT : Cancels Repeat Playback.
TRACK - REPEAT : Repeatedly play a track.
ALL - REPEAT : Repeatedly play all tracks.
RANDOM - REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the ] button, the next file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,]
buttons to adjust the Treble, Bass volume from -6 to +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
-6 and +6.
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to sync the audio with the
video. Use the [,] buttons to set the audio delay between
0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not available.
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Digital Optical
source via the Digital Optical jack so it turns on automatically when you turn
on your TV.
(Auto Power Link : Default OFF, ON-Anynet+ / OFF-POWER LINK or
OFF-Anynet+ / ON-POWER LINK ). The Anynet+ function lets you control
the Soundbar with the remote from an Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable.
Anynet+:Press the AUTO POWER button to turn the Anynet+ function
*
on or off.
9
DESCRIPTIONS