Panasonic WV-LC1700 Operating Instructions Manual page 16

Note:
• The respective setting items are allowed to set up different values in regard to each input signal. However, the same values
are used in common for the video input B and S-video input.
• "TINT" can be adjusted only if the input signal is of the NTSC system.
3. Move the cursor to the following setting items by pressing the C or D button. Then, adjust the levels by pressing the + or –
button.
Setting item
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT (NTSC system only)
H-POSITION
COLOR TEMP
SCAN
Note: Value can be set differently for each input signal.
4. To reset the settings, move the cursor to NORMAL SETTINGS by pressing the C or D button. Press the MENU button.
The currently displayed input signal (VIDEO A, VIDEO B, or S-VIDEO) currently selected will be reset to the factory default.
5. To return to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button.
6. After returning to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button.
The monitor display return to the default status.
Note: If no operation has been performed for 10 seconds or more, the monitor display returns to the default status.
16
Effect
+: Brightness level goes up.
–: Brightness level goes down.
+: Contrast level goes up.
–: Contrast level goes down.
+: Picture quality becomes sharper.
–: Picture quality becomes softer.
+: Color density level goes up.
–: Color density level goes down.
+: Tint becomes more greenish.
–: Tint becomes more reddish.
+: Position is moved to the right.
–: Position is moved to the left.
Setting value
–20 to +20
–20 to +20
–7 to +7
–20 to +20
–20 to +20
–10 to +10
6500K: Reddish color is intensi-
fied (default).
9300K: Blue color is intensified.
FULL:
The overall video image is dis-
played throughout the screen.
The aspect ratio of the video
image is disregarded and the
displayed image appears
somewhat slender.
OVER:
The screen height and the
image height are joined to dis-
play. Since the enlarged
aspect ratio remains to be 1:1,
the right and left parts of the
image are slightly lost.
UNDER:
The screen width and the
image width are joined to dis-
play. Since the enlarged
aspect ratio remains to be 1:1,
black strips are displayed in
the top and bottom parts of
the image.