Check Remaining Time; Special Recording Features - Samsung DVD-VR375 User Manual

recording

CHECK REMAINING TIME

Press the INFO button on the remote control.
The following information will be displayed.
(Current deck status, recording speed, remaining time, input channel,
current time.)

SPECIAL RECORDING FEATURES

While a recording is in progress, you can watch a DVD or VCR. (for example, you can watch VCR playback while
recording from a DVD and vice-versa)
1. Watch a different media during recording
You can watch a DVD during VCR recording or watch a Video tape during DVD recording.
•
During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD
and start playback.
•
During DVD recording, insert a Video tape in the VCR deck. The output will automatically change to the
VCR and start playback. (Only if the tape is missing the safety tab)
2. To Add Recording Time
Refer to the One-Touch Recording (OTR). (See page 62)
3. Recording on the DVD and VCR at the same time
You can record on the DVD and VCR at the same time, but both modes must be set up to record
separately.
•
Press the DVD/VCR button to set the unit to DVD or VCR mode.
•
Press CH/TRK or INPUT SEL. button repeatedly to select the channel or input source for DVD or VCR.
•
Choose REC mode for DVD or VCR.
•
Press REC button for DVD or VCR.
M

When the DVD Recorder & VCR is connected to your TV using HDMI or Component video cables, the VCR's playback
screen will not be displayed during DVD recording.

You cannot record different channels at the same time.

The DVD and VCR cannot start recording at the exact same time.
You must set one mode to start recording, then the other.
66_ recording
(DVD-Video disc only)
DVD-RAM
Stop
Stop
00:00:37
00:00:00
SP
LSP
Rem 02:00 Rem 01:59
AV 1 AV 2
VCR