System-Related Command Summary - Racal Instruments 3153 User Manual

:TRIGger:LEVel <value>
:TRIGger:LEVel?
:TRIGger:SLOPe {POSitive | NEGative}
:TRIGger:SLOPe?
:TRIGger:SOURce:ADVance {EXTernal | INTernal | TTLTrg<0-3> | ECLTrg0}
:TRIGger:SOURce:ADVance?
:TRIGger:TIMer: <value>
:TRIGger:TIMer?
:TRIGger:PHASe: <value>
:TRIGger:PHASe?
:TRIGger:IMMediate
*TRG
:ARM {OFF | ON}
:ARM?
:ARM:SLOPe[:STARt] {POSitive | NEGative}
:ARM:SLOPe[:STARt]?
:ARM:SLOPe:STOP {POSitive | NEGative}
:ARM:SLOPe:STOP?
:ARM:STARt
:ARM:STOP
:ARM:BREakpoint:POSition <position>
System-Related
Command
Summary
SCPI Command Reference 4-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The system-related commands are not related directly to waveform
generation but are an important part of operating the Model 3153.
These commands can reset or test the instrument, or query the
instrument for system information.
Commands and Parameters
SYSTem:ERRor?
SYSTem:VERSion?
RESet
*RST
TEST?
*TST?
*IDN?
*OPT?
User Manual 3153
(1.6,-10,10)
(100e-6,20e-6,1000)
(0,0,n)
(0,0,n)