LG 49UH610A Owner's Manual page 34

Depending upon the version of the software, icon position can be changed.
1 (Home) button to access the
Press the
Smarthome menu. Select
Wheel (OK).
(All Settings) and press
2
Select
3
Select the Network
(Ethernet) or Wi-Fi Connection
Fi Settings.
NETWORK
Picture
Sound
TV Name
[LG] webOS TV
Channels
Wired Connection (Ethernet)
Not Connected
Network
Wi-Fi Connection
Not Connected
Wi-Fi Direct
General
LG Connect Apps
Safety
Accessibility
Follow the instructions below that match to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1
Check the connection status of the TV,
AP (Router) and cable modem.
2
Power off and power on in the following order; (1st)
the cable modem, wait for the cable modem to reset,
(2nd) the AP (Router), wait for the AP (Router) to
reset and (3rd) the TV.
3
If you are using a static IP, enter the IP directly.
4
Contact Internet service provider or AP (Router)
manufacturer.
Troubleshooting Network Problems
(Settings) and press
Wheel (OK) .
Wired Connection
Advanced Wi-
WI-FI NETWORK
Picture
Network /
Sound
iptime_xu.ji
iptime_shinsung.kang
Channels
iptime_ungkee.choi
iptime_sungho.jo
Network
iptime_seungjun.lee
General
Add a Hidden Wireless Network
Connect via WPS PBC
Safety
Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
1
Unplug the power cord of the AP (Router) or cable
modem, wait 10 seconds. Reapply power.
2
Initialize (Reset) the AP (Router) or cable modem.
3
Contact Internet service provider or AP
(Router) manufacturer.
When X appears next to DNS:
1
Unplug the power cord of the cable modem or the
AP (Router), wait 10 seconds. Reapply power.
2
After the cable modem or AP (Router) has
initialized (Reset), try to reconnect.
3
Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right pane of
the network status window should be registered
with your Internet service provider.)
4
Check the AP (Router) manufacturer's website
to make sure your router has the latest firmware
version installed.