White Bal - Samsung SCC-C6433P User Manual

WHITE BAL

Lights are generally denoted as colour temperatures and expressed in Kelvin (K) units.
The general light colour temperatures are shown below.
You can select one of four modes for white balance adjustment as follows:
- ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the colour temperature is
monitored continuously and thereby white balance is set automatically. The following are the
approximate supported colour temperature ranges in these modes.
ATW1 : 2500K ~ 9300K(*1)
ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(*2)
*1. If the colour temperature is out of this range in ATW1 mode, proper white balance may not be
obtained. In that case, select ATW2 mode.
*2. In ATW2 mode, if one colour is dominated in the shot area, the colour can be displayed
differently. Therefore, select the mode which is appropriate for the environment.
- AWC8 (Auto-Tracing White Balance Control): In this mode, accurate white balance is obtained
by pressing the ENTER while having a white paper in front of the camera. White Balance
data will be maintained after set it once. AWC mode is best in locations where the colour
temperature of light source is constant.
8
10000K
Blue sky
Rainy
9000K
8000K
Cloudy
7000K
6000K
Sunny
5000K
4000K
3000K
Halogen lamp
2000K
Candlelight
1000K
Partly Cloudy
Fluorescent lamp
Tungsten lamp