Excel; Labview; Visual Basic; Agilent Vee - Omega Engineering 8 Channel Thermocouple USB Data Acquisition Module TC-08 User Manual

42 TC-08 User's Guide
3.4.4

Excel

The easiest way to transfer data to Excel is to use the TC-08 software application.
If, however, you need to do something that is not possible using the TC-08 software,
you can write an Excel macro which calls
values. The Excel Macro language is similar to Visual Basic.
The example
and channel 1 temperature, one per second, and assigns them to cells A1..B20.
3.4.5

LabVIEW

While it is possible to access all of the driver routines described earlier, it is easier to
use the special LabVIEW access routine.
To use this routine, copy
LabVIEW
user.lib
sub-vi which demonstrate how to use them. You can use one of these sub-vis for each
of the channels that you wish to measure. The sub-vi returns a temperature for
thermocouple types.
3.4.6

Visual Basic

The
Examples
usbtc0832.vbp
usbtc0832.bas
usbtc0832.Frm
usbtc0832.vbw
3.4.7

Agilent VEE

The example program
USB TC-08. There are prototypes in
reads in 20 values of the cold junction temperature
usbTC0832.XLS
usbtc08.vi
directory. You will then need
directory contains the following files, created in Visual Basic 6:
usb_tc08.vee
usbtc08.dll
from the
Examples
usb_tc08
shows how to collect a block of data from the
usb_tc08.vh.
to read in a set of data
subdirectory to your
sub-vi and an example