Timer Recording - Samsung DVD-HR733 Instruction Manual

Video
The disc revolves, but no image or bad quality
images is displayed.
Be sure that the Video Setting is
Checkpoint 1
properly set. (See page 41)
Check whether there is damage to or
Checkpoint 2
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 3
properly.
If scenes change from dark to bright
Checkpoint 4
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Sound
No sound.
Are you watching a programme in
Checkpoint 1
slow or skip mode?
If you are playing a programme at a
speed other than normal speed,
sound will not be heard.(except for
forward search (Fast 1) in disc.)
Check the connections and settings.
Checkpoint 2
(See pages 22~23, 39~40)
Check whether the disc is damaged.
Checkpoint 3
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected
Checkpoint 1
the correct digital output options in
the Audio Output Options menu.
(See pages 39~40)

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc or HDD for recording.
Check whether the current disc is
Checkpoint 2
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Recording will be cancelled if the
Checkpoint 2
power is interrupted due to a power
failure or another similar reason
while recording.
USB
Cannot copy MP3 or JPEG or DivX files
Check the connections and settings.
Checkpoint 1
(See page 27)
Checkpoint 2
Check the USB connection.
Disconnect and try to connect again.
Refer to "Compatible USB devices at
Checkpoint 3
host port" on page 7.
Cannot print image files.
Check the connections and settings.
Checkpoint 1
(See page 27)
Refer to "Printing Photos" on page 73
Checkpoint 2
Refer to "Compatible Printers at
Checkpoint 3
device port" on page 7
English - 123