Connecting With A Network Cable - Sony scph-10350EE Instruction Manual

Connecting with a network cable

You can connect the PlayStation
via the NETWORK connector on a Network Adaptor
(Ethernet) (for PlayStation
PlayStation
®
You can connect to a 100 mbps network using
100Base-TX cable or to a 10 mbps network using
10Base-T cable. For details, refer to the instructions
supplied with the network device you are connecting to
(such as a router, DSL modem or cable modem).
Warning
There is a protective sticker on the NETWORK connector to help
prevent accidental connection of the wrong type of cable.
Remove the sticker the first time you use the NETWORK
connector. After you have removed the sticker, be careful not to
connect cables of the wrong type to the NETWORK connector.
Do not connect network cables or telephone cords of the
following types to the NETWORK connector; too much
electrical current may pass through the connector,
causing a malfunction, excessive heat or fire in the
connector:
• Network cables of types other than 100Base-TX and 10Base-T
• Normal telephone lines
• The jack of an ISDN (digital) compatible public phone
• PBX phone lines
• Telephone lines for home networks or business phones
• Other types of telephone lines
Caution
When you connect to a network, the Internet service provider
may charge a usage fee. For details, refer to the instructions
provided with the software in use or contact your Internet service
provider.
®
2 console.
2 console to a network
®
2) installed in the
25