Switching On And Setting Temperatures - Siemens KG..U SERIES Instructions For Use Manual

en
Getting to know your appliance
5 "super" display (cool)
Illuminates only if "fast cooling" is on.
6 "super" display (freeze)
Illuminates only if "fast freeze" is on.
7 Temperature display for freezer
compartment
Indicates three functions :
a) Selected temperature for freezer
compartment
b) "AL"(alarm) display
Is displayed when the freezer
compartment is too warm.
c) "Warmest temperature" in the
freezer compartment
If "AL" flashes on display 7, the freezer
compartment was too warm due to a
power failure or a fault in the freezer
compartment.
When the Alarm Off button is pressed,
the warmest temperature reached in
the freezer compartment is indicated
on display 7 for five seconds.
This value is then cleared – "AL"
(Alarm) is then indicated on display 7
without flashing.
8 The "alarm" display
Illuminates and the warning tone sounds
simultaneously, when it becomes too
warm in the freezer compartment.
This extinguishes when the freezer
compartment has reached its operation
temperature.
9 Button for selecting temperature in
freezer compartment
Press the selection button repeatedly or
continuously until the desired
temperature is displayed. The value last
selected is stored. (The temperature
selection is displayed consecutively from
-16 0 C to -26 0 C. -16 0 C is redisplayed
after -26 0 C).
24
Downloaded from Fridge-Manual.com Manuals
Note
"AL" (Fig. 2/7) is displayed if the freezer
compartment is too warm caused by a
power failure or a fault. The temperature can
be selected by pressing the selection button
9. The selected temperature is displayed for
5 seconds. "AL" is then redisplayed. The
selected temperature is displayed as soon
as the freezer compartment has reached the
selected temperature.
10 "super" button
Serves to switch fast-freeze on and off.
Display "SU" 7 and the "Super" display 6
(orange lamp) indicate that "super
cooling" is on. The fast freezing serves
for freezing of large quantities of fresh
food and should be switched on up to
24 hours before placing the fresh food
in the freezer compartment.
The refrigerating unit operates continually
after being switched on, a very low
temperature is achieved in the freezer
compartment.
11 "alarm" button
Serves for switching off the warning
buzzer.
The warning buzzer sounds if the freezer
temperature is too warm, i.e. if the
frozen-food is in danger (display 9 flashes
simultaneously).
There are occasions when the warning
buzzer may sound without the frozen-
food being in any danger:
- when you start up the appliance
- when placing fresh food in the freezer
without switching on fast freezing
- and if the freezer compartment door is
open too long.
Once the warning buzzer has been
switched off, the "acoustic warning"
automatically returns to stand-by, if the
freezer compartment has reached its
operating temperature again.

Switching ON and setting temperatures

2
Fig.
G
Put the plug in the socket.
G
When the buttons are pressed, an
acknowledgement signal is emitted.
G
Press the appliance main switch 1.
Warning signal is emitted, refrigerator
temperature display (4 °C) 4 and "Alarm"
display 8 illuminate. "AL" (Alarm) 7
flashes.
G
Press "alarm" button 11.
Press the Alarm Off button 11. Warning
signal stops and the "warmest
temperature" is indicated on display 7 for
5 seconds. "AL" 7 stops flashing. The
appliance is now running.
G
Set the temperature for the freezer
compartment.
Repeatedly press or hold down the
selection button 9 until the required
temperature is displayed. The value last
selected is saved. (The temperature
selection is displayed consecutively from
-16 °C to –26 °C. –16 °C is redisplayed
after –26 °C).
We recommend setting the temperature
of the freezer compartment at -20 0 C.
Note
"AL" is indicated on display 7 if the freezer
compartment is too warm caused by a
power failure or a fault. The freezer
compartment temperature can be selected
by pressing the selection button 9. The
selected temperature is indicated for 5
seconds on display 7. "AL" is then
redisplayed. The selected temperature is
indicated on display 7 as soon as the freezer
compartment has reached the selected
temperature.
en
G
Set the temperature for the refrigerator
compartment.
Press the selection button 3 repeatedly or
continuously until the desired temperature
is displayed. The value last selected is
stored. (The temperature selection is
displayed continuously from 8 0 C to 2 0
8 0 C is redisplayed after 2 0 C).
We recommend setting the temperature
of the refrigerator compartment at 4 0 C.
Note
G
The temperature in the refrigerator
compartment may fluctuate because:
– The appliance door is opened frequently
– Large quantities of fresh food are placed
in the refrigerator compartment and/or
freezer compartment
– The ambient temperature changes
– The temperature-selector setting for the
freezer compartment changes or
"super" freeze has been activated.
G
To prevent condensation in the area of
the door seal, the sides of the housing
are partially heated.
C.
25