Software Update - Roberts Stream 65i User Manual

Software update

From time to time, new software features for your sound system may be developed. Your sound system
has therefore been designed to allow its internal software to be updated using your Internet connection.
You should not attempt to update your sound system unless it is recommended to you by Roberts Customer
Services. Updating the software may remove all network settings, radio station presets and alarm settings
from your sound system.
It is important that you do not attempt this procedure unless you have a good Internet connection and a
reliable mains power supply. If the radio connects to your router using a WiFi connection, make sure that
this is also reliable before proceeding.
1. The 'Software update' option is accessed via the System Settings menu. When you select 'Software
update' the menu will display 'Auto check setting' and 'Check now'. If you want your sound system to
check periodically for new software versions
check settings'. Then press and release the Select button and select 'YES'. If you do not want your
sound system to check for updates select the 'NO' option.
2. To check if there are any software updates available currently,
highlight 'Check now' and then press and release the Select button. The sound system will check to
see if an update is available. The display will show 'Checking for new versions'. If there are no updates
then the display will show 'Software up to date'. If a software update is available your sound system
will then offer the choice of updating the software or not, displaying 'New version available. Update
software?'. Select the 'YES' option if you wish to go through the update process.
3 If you choose to update your sound system it will fi rst download the new software and will then reprogram
its internal memory. This may take anything from a few seconds to a few minutes depending on the
speed of your internet connection.
4. Once the software update is completed, the sound system will prompt you to press Select to restart.
Press and release the Select button and your sound system will then restart. You may fi nd that you
will need to reconfi gure your network connection following an update. You may also need to re-enter
all radio station presets, alarm settings, and confi guration options.
VERY IMPORTANT: Do not switch off the power to the sound system until the update operation is
complete and the sound system has restarted, otherwise the unit may become permanently damaged.
117
press the Menu Up or Down buttons
press the Menu Up or Down buttons
to highlight 'Auto
to
Main menu
SD
Bluetooth
Aux in
Sleep
Alarms
System settings
System settings
Language
Rec. default dest.
Factory reset
Software update
Setup wizard
System info
Software update
Auto-check setting
Check now
Software update
Check periodically for
new versions?
Software update
Auto-check setting
Check now