Locking/Unlocking The Control Stick; Showing/Hiding The Samsung Logo While Booting; Enabling The Tv To Boot Faster; Removing Flickering - Samsung UA40J6300AR E-Manual

Locking/Unlocking the Control Stick

MENU System
You can lock and unlock the front panel buttons (menu, channel, and volume) of the TV and the
control stick on the back of the TV.

Showing/Hiding the Samsung logo while booting

MENU System
You can enable or disable the Samsung logo display that appears when the TV starts up.
"
This function is not available when

Enabling the TV to boot faster

MENU System
Samsung Instant On
You can set
"
Samsung Instant On
When
in the TV.
"
Samsung Instant On
The
Samsung Instant On
after you set
TV, this function does not work.
"
Samsung Instant On
Even if the
standby power consumption specification presented on the product label.

Removing Flickering

MENU System
Change the power frequency for the cable to stop the camera from flickering.
"
This function is not available on certain models in specific geographical areas.
General Panel Lock
General Boot Logo
Samsung Instant On
General Samsung Instant On
On
to
is set to On, the use history of the apps that you used on the TV may be stored
function works when you turn on the TV while its power cable is still connected
to On. If you disconnect, reconnect the power cable, and then turn on the
function is on, the power consumption while the TV is turned off meets the
General Anti Flicker
Try Now
Try Now
is set to On.
Try Now
so that the TV boots up faster.