Omega Engineering HH147 User Manual page 38

Caution
1. Input protection: The temperature jack carry's
a maximum voltage of 34 volts DC or AC.
2. Temperature jacks: Designed for insertion of
a standard small thermocouple jack which
have a center spacing of 7.9 mm between the
two prongs.
3. Please DO NOT place the HH147 inside a
microwave for temperature testing.
4. A correct thermocouple slot should be chosen
when operating the temperature gauge.
5. Please DO NOT attempt to use a temperature
gauge that is not working properly. Consult
Omega Customer Service for repair service
at once.
6. Please DO NOT attempt to operate the
temperature gauge around sites where
explosive gases, vapor, or dust particles are
present.
35