Samsung DVD-P365 Manual page 7

Rear Panel
1
1. SCART JACK
- Connect to a TV scart input jack.
2. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to con-
nect to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to con-
nect to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
3. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
video.
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- If P-SCAN Video Output is selected in Setup Menu, Video will not work.
- See pages 27 to get more information on how to use the setup menu.
4. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
5. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
- The Video Output in Setup Menu must be set to
S-Video.
6. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
, P and Y S-Video jack on your television for higher picture
R B
quality.
- The Video Output in Setup Menu must be set to
S-Video.
2
3
2 4 5 6
7