Cable Connection; I Connection With Two Or More Video Monitors; I Digital Disk Recorder Connection; I Pc Connection - Panasonic WV-LW1900 Operating Instructions Manual

I Cable connection
To provide VIDEO input, connect the video output to the VIDEO input connector on the rear face of this monitor with a coaxial
cable or to the HDMI input connector on the rear face of this monitor with an HDMI cable.
The maximum length of the coaxial cable shall be observed as follows:
Cable type
3C-2V
5C-2V
7C-2V
10C-2V
The HDMI cable shall be 10 m or less, and an extension cable and a repeater should not be used.
Use of Panasonic HDMI cables is recommended.

I Connection with two or more video monitors

When plural video monitors are connected, connect the VIDEO input connector of another video monitor to the video output
connector of this monitor. Use a coaxial cable for connection.
Up to 10 video monitors can be connected. If 11 or more video monitors are connected, image quality may be degraded. The
total length of each cable should not exceed 150 m.

I Digital disk recorder connection

• To play video:
Connect the video output connector of the digital disk recorder to the VIDEO input connector or HDMI input connector of
this monitor with a coaxial cable or an HDMI cable.
• To provide audio input:
Connect the audio output connector of the digital disk recorder to the audio input connector of this monitor with an audio
cable.

I PC connection

Connect the video output (analog RGB) of a PC to the PC input connector of this monitor. The length of a PC cable shall be 3 m
or less.
22
Length
250 m
500 m
600 m
800 m