Screen Auto Lock; Restore Settings; Network Selection - CARD-TECH CM1 User Manual

2.1 Network selection

To automatically or manually select network.
3 Security settings
3.1 SIM lock
Before the setup, it is required to input PIN code for switch on the phone. After 3
invalid PIN input, you need the PUK (personal unlock key) to unlock and modify
PIN code. If you lose the code, also contact your network operator.
3.2 Phone security
If this function is enabled, you must enter the phone code upon each startup.
The default password is "0000". 。

3.2 Screen auto lock

This function is used to lock the phone keypad operation.
l Off
l 15 sec.
l 30 sec.
l 1 min.
l 5 min.
l Press the left soft and "#" key to lock or unlock for the keypad.

4 Restore settings

Input the default phone password "0000". It is for restore the settings to factory
-­‐ 4 6 -­‐
www.card-tec.com