Installing The 'Installer' Application - Omega Engineering RS232 User Manual

Installing the 'Installer' Application

The Lantronix Installer program referred to in the remainder of this document must be installed; this
application will allow you to configure the device.
The installation program can be found in the '\Tools\NetPort' folder in your OMEGALOG
directory (also on the OMEGALOG
To install:
1. Go to the following directory:- \Program Files\OMEGALOG\Tools\NetPort
2. Double click on the file XPortInstaller.msi
NOTE: if a message appears asking you to install the .NET framework you must do the
following first.
- Double click on the file dotnetfx.exe (under \Progra m Files\OMEGALOG\Miscellaneous)
- Once installation has completed repeat step 2
3. Follow the instructions in the XPort installer wizard.
4. Upon completion of the installation click Close to exit
®
CD).
®
installation
Page 5