Storing Channels Manually
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which you
wish to identify
1
Press the MENU button.
Result:
The main menu is displayed.
Press the ¤or button to select Channel.
2
Result:
The options available in the Channel group are displayed.
3
Press the ENTER
Press the ¤or button to select Manual Store.
4
Press the ENTER
Result:
The options available in the Manual Store menu are
displayed with Prog.No selected.
5
Press the ENTER
To assign a programme number to a channel, find the correct
number by pressing the ¤or button and then press the
button.
ENTER
Press the ¤or button to select Colour System and then press
6
or button.
the ENTER
Select the Colour System required by pressing the ¤or button
repeatedly and then press the ENTER
Result:
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43
Press the ¤or button to select Sound System and then press the
7
or button.
ENTER
Select the sound standard required by pressing the ¤or button
repeatedly and then press the ENTER
Result:
The sound standards are displayed in the following order:
BG - DK - I - L
8
For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting Prog.No by pressing ¤or
button.
or button.
or button.
button again.
or button.
or button.
English-19