Chapter 2. Installing The Dock; Setting Up The Dock - Lenovo ThinkPad WiGig Dock User Manual

Chapter 2. Installing the dock

This chapter provides instructions on how to set up the dock, manually install the required software, and
install update packages through the System Update program.

Setting up the dock

To set up the dock, do the following:
1. Connect the power cord to the ac power adapter.
2. Connect the ac power adapter to the power connector of the dock.
3. Connect the power cord to an electrical outlet.
4. Turn on the dock by pressing the power button.
5. If an external display is available, connect the external monitor to the appropriate connector (HDMI or
DP connector) on the dock. The external monitor shows some wireless pairing instructions when you
connect your notebook computer to the dock.
6. Position your notebook computer close to the dock, within 1.8 m (6 ft). The dock also must be within a
120-degree sector region relatively to the rear of the notebook computer display.
© Copyright Lenovo 2016 5