System Requirements - Lenovo ThinkPad WiGig Dock User Manual

4 Power/Connection button: Turn on or turn off the dock. The indicator on the button is green on when the
dock is powered on. You can also press the button to confirm connection.
5 USB 3.0 connector: Connect USB compatible devices that are compatible with USB 3.0, such as
a USB storage device. For faster and optimal data transfer, ensure that you connect a USB 3.0 device to
the USB 3.0 connector.
6 8
Always On USB 3.0 connector: Connect USB compatible devices or charge some mobile digital
devices and smartphones when the dock is not connected to the notebook computer or the dock is off with
the power adapter connected.
7 Security-lock slot: To protect your dock from theft, you can use a security cable lock, such as a
Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other
non-permanent fixture.
9
ac power connector: Connect the ac power adapter.
10 HDMI connector: Connect a high-definition television.
11 DP connector: Connect a high-performance monitor, a direct-drive monitor, or other devices that use
a DP connector.
12 Ethernet connector: Connect the dock to an Ethernet LAN.
Bottom view
1 Reset hole: If your dock stops responding after firmware updates or other operations, hold down the
power button for more than four seconds to turn off the dock. Insert a straightened paper clip into the
reset hole and power on the dock to reset the dock.

System requirements

Before using the dock, ensure that your notebook computer meets the following requirements.
Operating system:
®
• Microsoft Windows
• Microsoft Windows 8.1
• Microsoft Windows 10
®
Hardware: Intel WiGig card
®
7
.
Chapter 1 About the dock
3