Philips PET1002 Service Manual page 8

4.0 MECHNICAL INSTRUCTIONS
1. Back View as Fig.1
Remove 12 screws to remove base
Fig.1
2. Soldered short pattern for laser diode as Fig.2
Fig.2
3. Remove DVD driver and main board as Fig.3,4
Broken connection of DVD driver and main board
Fig.3
Remove DVD driver and main board
Fig.4
4. Remove key board and other parts as Fig.5
Fig.5
12 screws
remove
screws
soldered
5. Remove top cover as Fig.6
Fig.6
6. Remove IF board and HV board as Fig.7
Fig.7
7. Remove LCD TFT as Fig.8
Remove serew to remove LCD TFT as Fig.8
Fig.8
remove
screws
remove
screws
6 screws