Closing The - LG IP LDK-20 Installation Manual

IP LDK-20 Installation Manual Board Installation
4.2.2 Closing the front cover
1. Insert the front cover into the slot on a module as show in Figure 4.2.2.
2. Then put the front cover down on a module in the direction of the arrow, as shown.
3. Turn the screws clockwise to tighten, as in the Figure.
Figure 4.2.2 Closing the front cover
• NOTE
For safety reasons, close the front cover and tighten the screws prior to operating the IP LDK-20 System.
50