Automatic Operation; Indoor Fan Speed Control - Panasonic CS-C18HKD Service Manual

12.3. Automatic Operation

• Automatic operation can be set using remote control.
• This operation starts to operate with indoor fan at SLo speed for 25 seconds to judge the intake air temperature.
• After judged the temperature, the operation mode is determined by referring to the below standard.
• Then, the unit start to operate at determined operation mode, until it is switched off using remote control, with the setting
temperature as shown in below table.
• The setting temperature for all the operations can be changed one level up or one level down from the standard temperature as
shown in below table by pressing on the temperature up or temperature down button at remote control.
• The operation mode judging temperature and standard setting temperature can be increased by 2 C permanently, by open the
circuit of JX03 at indoor electronic controller.

12.4. Indoor Fan Speed Control

• Indoor Fan Speed can be set using remote control.
12.4.1. Fan Speed Rotation Chart
COOL/DRY CS-C18HKD
S Hi
Hi
Me
H Lo
C Lo
Lo-
S Lo
Q Hi
Q Me
Q Lo
CS-C24HKD
1460 1590
1400 1500
1250 1390
1220 1330
1150 1240
980 1100
780
1300 1400
1150 1290
1050 1140
30
860