Philips BTM5120 User Manual page 12

2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'PHILIPS BTM5120' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
4
Play audio on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
Tip
•
The unit can memorize up to 4 previously connected
Bluetooth devices.
•
The unit can connect to 3 Bluetooth devices at the
same time.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range
» The current Bluetooth connection is
disconnected.
To pair with another Bluetooth-
enabled device:
• Press and hold
» The unit switches to pairing mode,
ready for pairing with a new
Bluetooth-enabled device.
To clear Bluetooth pairing history:
• Press and hold
» The current Bluetooth is cleared.
EN
10
for 3 seconds.
for 10 seconds.