Omega FoodPro Instruction Manual page 10

ASSEMBLY – LARGE BLADE OR DOUGH BLADE
1.
2.
3.
1. Place the large work bowl onto the
motor housing with the main handle
to the left of the power panel. This
aligns the bowl to properly engage
the safety interlock. Turn the main
handle to the right until it "clicks"
or "locks" into place. The main
handle should now be centered
with the Power Panel.
2. Place the Large Blade or Dough Blade
onto the main motor shaft. You may
have to rotate the blade partially to
properly "seat" onto the shaft.
3. Place the Work Bowl Cover onto the
Work Bowl with the interlock "tab"
to the left of the main handle. Turn
the Cover to the right until it "clicks"
or "locks" into place. The "tab" should
now be aligned with the Main Handle.
11