Black & Decker LHT2220, CHH2220 Instruction Manual page 12

Problem
• Stow running, noisy or hot blades.
• Unit will not start.
• Battery won't charge.
Possible Cause
Dry, corroded blades.
Blades or blade support bent.
Bent or damaged teeth.
Loose blade bolts.
Battery not installed properly.
Battery not charged.
Lock off not fully operated.
• Battery not inserted into charger.
• Charger not plugged in.
• Surrounding air temperature too hot
or too cold.
Possible Solution
Lubricate blades.
Straighten blade or blade support.
Straighten teeth.
Tighten blade bolts.
Check battery installation.
Check battery charging requirements.
Check that lock off is fully pulled back
prior to moving main trigger.
• Insert battery into charger until green LED appears.
Charge up to 8 hours if battery totally drained.
• Plug charger into a working outlet. Refer to
"Important Charging Notes" for more details.
• Check current at receptacle by plugging in a
lamp or other appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you turn
out the lights.
• Move charger and tool to a surrounding air
temperature of above 40 degree F (4.5°C) or
below 105 degree F (+40.5°C).
For assistance, visit our website w' _w.blackanddecker.com for the location of the se_vice center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
12
See 'Tools=Electric'
- Yellow Pages -
for Service & Sales