Magic Motion Remote Controller Check; Wi-Fi Mac Address Check; 3D Module Inspection; Hdmi Arc Function Inspection - LG 55EG9100 Service Manual

5.3. Magic Motion remote controller Check

5.3.1. Test equipment
- RF-remote controller for check, IR-KEY-CODE remote
controller.
- Check AA battery before test. A recommendation is that a
tester change battery every lots.
5.3.2. Test
(1) Make pairing with TV set by pressing "Start key(Wheel
key)" on RCU.
(2) Check a cursor on screen by pressing 'Wheel key" of RCU
(3) Stop paring with TV set by pressing "Back+ Home" key of
RCU.
5.3.3. Applied models
Chassis Model Name
EA51E 55EG9100-UB

5.4. Wi-Fi MAC Address Check

5.4.1. Using RS232 Command
Command
Transmission [A][l][][Set ID][][20][Cr] [O][K][x] or [N][G]
5.4.2. Check the menu on in-start
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

5.5. 3D Module inspection

5.5.1. Test equipment
5.5.2. Test method
Magic RF receiver
Built-in
Set ACK

5.6. HDMI ARC Function Inspection

5.6.1. Test equipment
5.6.2. Test method
- 15 -
(1) Pattern Generator MSHG-600 or MSPG-6100 (HDMI 1.4
support)
(2) Pattern: HDMI mode (model No. 872, pattern No. 83)
(1) Input 3D test signal as (Fig.1).
(Fig.1) HDMI Mode 872, Pattern No.83
(2) Press 'OK" key as a 3D input OSD is shown.
(3) Check pattern as Fig2 without 3D glasses. (3D mode
without 3D glasses)
(Fig.2) OK in 3D mode without 3D glasses (LEFT)
(Fig.3) NG in 3D mode without 3D glasses(RIGHT)
- Optic Receiver Speaker
- MSHG-600 (SW: 1220 ↑)
- HDMI Cable (for 1.4 version)
(1) Insert the HDMI Cable to the HDMI ARC port from the
master equipment (HDMI1)
(2) Check the sound from the TV Set
LGE Internal Use Only