Advertisement
Correcting Wrong Year
1: Select Internet Setup.
2: Select Connections.
3: Highlight the name of your network and select OK on the remote.
4: Select DELETE
5: Highlight your network name again and select OK on the remote.
6: Select REFRESH
7: Go to Network from the left menu and disable Wireless Network.
8: Pull the power cord from your box. Wait 10 Seconds and plug it back in.
9: Go back into Internet Setup > Network > Enable Wireless Networks > Connections >
Highlight Network Name > Press OK > Connect > Input Password
For wired Networks. Go to: Connections > Highlight Wired on the right > Select Ok on
the remote > Disconnect > Go back to Networks > Disable Wired Networks >
Pull power cord form your box > Wait 10 seconds then plug it back in.
Go back into Internet Setup > Networks > Enable Wired Networks
Advertisement
