Advertisement
Remote Control Trouble Shooting
If remote control is non functional after first boot up. Unplug the power supply
from the M-Box. Wait 10 seconds before plugging it back in.
After boot up, remote should be fully functional.
Video Playing Commands
During video play select Ok on Remote. A drop down menu will appear from the
top of the screen.
Center button with two vertical lines is Pause. Square box one right of pause is
to completely Exit out of the video.
Pressing Right on the remote while a video is plaining, will skip the video
forward.
1 right click on the remote will skip forward: 10 seconds.
2 right clicks: 30 seconds
3 right clicks: 1 minute
4 right clicks: 5 min
Pressing Left on the remote will skip back with same time increments as the
forward option.
Pressing up on remote will skip forward: 10 minutes
Pressing down on remote will skip back in reverse: 10 minutes
If the screen happens to go blank when exiting out of menus. The M-Box will
more then likely reboot itself in about 5 to 10 seconds. If the screen stays blank,
just pull the power plug, wait 10 seconds and plug it back in.
Advertisement
