Lexus 2007 GS430 Quick Manual page 513

5-1. Essential information
Installing towing eyelet
STEP 1
STEP 2
STEP 3
Location of the emergency towing eyelet
n
P. 473
440
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body, as shown in the
illustration.
Insert the towing eyelet into the
hole and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench.
I n f o r ma t i o n P r o v i d e d b y :