Hold (Hold); Remaining Memory Display - Olympus V 90 Instructions Manual

Hold (HOLD)

operations and is convenient when carrying the recorder
in a bag or pocket.
To conserve battery power, the LCD display disappears
when the voice recorder is set to the Hold status in the
Stop mode.

Remaining Memory Display

During recording, the LCD shows the remaining memory
capacity in time.
20
When the HOLD switch is
set to [HOLD], the current
mode is locked and all
buttons are disabled. This
helps to prevent accidental
pressing of buttons that
can activate undesired
When memory capacity
has run
out,
shows [00m00s] together
with [FULL]. Recording is
no longer possible.
If you want to record a
message, erase
unnecessary messages
(see page 13).
When 100 messages have
been recorded in a folder,
the LCD shows [FULL] and
recording is no longer
possible.
If you want to record a
message, use another
folder or erase
unnecessary messages.
the LCD