Observation Of The Engine Speed - HE PARAMOTORES R 80 Installation Instructions Manual

i. Observation of the engine speed.
To determine the best possible transmission ratio, the use of a rev-counter is required for
observation of the speed limits.
Note: HE Paramotores offers as an accessory the following indicating instrument: Tiny-Tach
inductive rev counter.
Note: This instrument is operating via an integrated battery. At engine start the readings of
the connected sensors (inductive pick-up for engine speed (r.p.m.) will be displayed). This
display will remain on for 5 seconds after engine stop.
Attention: Pay attention to the manufacturer's notes about connections and operation of the
instrument.
Attention: Use the original spark plug of 5 k resistance, so that the operation of the rev
counter is not impaired.
and tightening spot.
Secure induction cable with cable ties on the frame.
Attention: The induction cable must be free of tensile stress;
stress could damage the cable or could result in the malfunctioning
of the cable and the instrument.
Warning: Before engine operation, read the Operator's Manual.
Confidencial HE Paramotores
Wind at least three turns of the inductive cable between the ignition
coil and spark plug connector and secure it with a cable tie on the
ignition cable.
Attach the instrument with cable ties for highest visibility and lowest
inconvenience on the harness or chassis.
Attention: Use a vibration damping pad between the instrument
Página 9 30/03/2007