Denon DN-271HE User Manual page 6

Setup
Items not listed under
1. Use an HDMI cable to connect DN-271HE's HDMI In to the HDMI output
of your source device (Blu-ray player, gaming console, etc.).
2. Connect DN-271HE's outputs to their corresponding output devices:
• HDMI Output: Use an HDMI cable to connect this to your TV or other
HDMI display.
• Optical Output: Use an optical cable to connect this to your amplifier,
audio interface, etc.
• Surround Audio Outputs: Use properly wired Euroblock connectors and
speaker wire to connect these to your amplifier or powered speakers.
Note: We recommend using the HDMI output only, optical output only, or
Surround Audio Outputs only. Using multiple outputs and/or selecting the
wrong source can produce unexpected results.
Important: If your input signal (sent into the HDMI In) is in a 4K x 2K or 3D
format, use a display that is compatible with that format as well as high-
speed HDMI cables.
3. Use the included power adapter to connect DN-271HE's power input to
your power source.
Make sure the Source Selector is properly set before you power on DN-
271HE, your audio source, your speakers, etc. See
information.
6
Introduction > Box Contents are sold separately.
Operation for more