Denon DN-271HE User Manual page 5

7. HDMI In: This input receives the input signal from which it will extract
the audio signal. Use an HDMI cable to connect this input to your
source device (Blu-ray
more information.
8. HDMI Output*: This output sends the extracted audio signal to your
TV or other HDMI display. Use an HDMI cable to connect this output
to it. See Setup
Important: If your input signal (sent into the HDMI In) is in a 4K x 2K
or 3D format, use a display that is compatible with that format as well
as high-speed HDMI cables.
9. Optical Output*: This output sends the extracted audio signal to your
amplifier, audio interface, etc. Use an optical cable to connect this
output to it. See
10. Surround Audio Outputs*: These outputs send the extracted audio
signal to your 7.1 surround sound system. Use 4 properly wired 3-pin
Euroblock connectors and speaker wire to connect these outputs to
your system. See
11. Service Input: This input is for manufacturing or service/repair
purposes only. Do not connect anything to this input.
* Important: We recommend using the HDMI output only, optical output
only, or Surround Audio Outputs only. Using multiple outputs and/or
selecting the wrong source can produce unexpected results.
®
player, gaming console, etc.). See
for more information.
Setup for more information.
Setup for more information.
Setup for
5