Vivotek FE9181-H User Manual page 12

VIVOTEK
Ceiling or Wall Mount
1. Attach the supplied alignment sticker for the camera base to the a ceiling or wall.
2. Using the circles on the sticker, drill pilot holes into the ceiling. Then hammer the supplied
plastic anchors into the holes.
3. (Optional) Drill a cable hole on the ceiling/wall, and feed the cables through the hole.
4. Secure the camera base to the ceiling/wall with the supplied screws.
1
IMPORTANT:
Arrange the cables neatly to avoid getting in the way
when the dome cover is attached.
12 - User's Manual
2
3
4