Digital Output - Samsung BD-P1200 User Manual

Press the Press the
... ... † † ... ... † †
4 4
option from the options described below, then press option from the options described below, then press
the ENTER or √ button. the ENTER or √ button.
Press the Press the
... ... † † ... ... † †
5 5
then press the ENTER button. then press the ENTER button.
Press the RETURN or œ button to return
to the previous menu.
NOTE
Press the MENU button to exit the menu.

Digital Output

• PCM : Select this when your equipment does not
decode Dolby Digital.
Bitstream
: Outputs Dolby Digital or MPEG-2 or DTS
•
BD Player
BD
MOVE
If you have selected a LPCM sound track on a
disc, the output will automatically be set to PCM.
NOTE
Be sure to select the correct Digital Output or
you will hear no sound or a loud noise.
When playing a Dolby Digital movie make sure
the Digital Output is set to Bitstream.
Downloaded From Disc-Player.com Samsung Manuals
buttons to select the desired audio buttons to select the desired audio
buttons to select the desired item, buttons to select the desired item,
audio as Bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
Audio Setup
Digital Output : PCM
Title √ √
PCM Down Sampling : On
√ √
Music
Dynamic Compression : On
√ √
Speaker Setup
√ √
Photo
Setup
SELECT RETURN EXIT
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible. 96KHz signals
will be down converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. Signals will be
output without any changes.
BD Player
BD
Digital Output
Title
PCM Down Sampling : On
Music
Dynamic Compression : On
Speaker Setup
Photo
Setup
MOVE SELECT
Even when PCM Down Sampling is set to Off,
some discs will only output downsampled
audio through the digital outputs.
NOTE
During disc playback, press the Stop button
twice (resuming playback is disabled) before
setting PCM Down Sampling. If you press the
Stop button once (resuming playback is still
enabled), you can't set PCM Down Sampling
as it is deactivated.
HDMI
• If your TV is not compatible with compressed multi-
channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard
Dynamic Range.
• On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
BD Player
BD
Digital Output
Title
PCM Down Sampling : On
Music
Dynamic Compression : Off
Speaker Setup
Photo
Setup
MOVE SELECT
Audio Setup
: PCM
√ √
√ √
√ √
√ √
RETURN EXIT
Audio Setup
: PCM
√ √
√ √
√ √
√ √
RETURN EXIT
English - 39