Electrical Connection - Smeg FAB32UPGRN User Manual

• To allow proper cooling of the
condenser, the refrigerator must not be
placed too close to the wall. To prevent
this, the appliance comes complete with
two plastic spacers which must be fitted
to the top of the condenser.
Positioning
Place the appliance on a stable and level
floor. If the floor is not perfectly level, use
the two adjustable feet on the front part of
the appliance.
The appliance has two small wheels on the
back to allow it to be moved and
positioned more easily.
In any case, we recommend moving the
appliance very carefully in order to avoid
damaging the floor (especially in the case
of wooden floors).
28
Installation

5.3 Electrical connection

• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Do not pull the cable to remove the
plug.
General information
• Check the grid characteristics against the
data indicated on the plate. The
identification plate bearing the technical
data, serial number and brand name is
visibly positioned inside the appliance.
Do not remove this plate for any reason.
• Make sure that the plug and socket are
of the same type.
• Avoid using adapters and shunts as
these could cause overheating and a risk
of burns.
• The plug must always be accessible
when the appliance is installed.
• Leave the refrigerator standing vertically
for at least two hours before turning it on
for the first time.
• If it is necessary to replace the power
cable, this must be performed by an
authorised technician from Technical
Support Service.
Power voltage
Danger of electrocution