Setting Time/Date (Time&Date)
1
Changing the Time/Date
Press the STOP button while the recorder has stopped recording to check "Time & Date" and
"Remain". If the "Time & Date" is not correct, set it using the procedure below.
1
18
3
Press the OK button to complete the setup screen.
The clock will start from the set date and time. Press the OK
3
button according to the time signal.
........................................................................................................
Notes
• If you press the OK button during the setup operation, the recorder will
save the items that were set to that point.
• After setup, a message will sound saying that If the guidance is not required,
select "Off", and the screen goes into "Voice Guide" setup (P87). If you
don't want the guidance feature, select "Off".
1
Press the
screen, and select the "Time&Date".
See P91, 93 regarding the menu.
Press the OK or 9 button.
2
The Time/Date screen appears. The hour
indicator flashes, indicating the start of the
2
Time/Date setup process.The following steps
are the same as Step 1 through Step 3 of
"Setting Time/Date" (P17).
3
Press the STOP button to close the
3
menu.
+
–
or
button in the menu