Resetting To Factory Settings - Topfield TF 5000 PVRt User Manual

28 Service Search
Manual search
Start search

4.2 Resetting to factory settings

You may choose to search only services of a specific trans-
ponder because more than one service are provided via each
transponder. To do that, set the Search Mode option to Man-
ual, and then at the Channel option select your desired trans-
ponder. The number ranges from 6 to 12 in VHF and 28 to 69
in UHF.
To search one service of a transponder, set the Search Mode
option to Advanced, and at the PID option specify the PIDs of
your desired service with the numeric buttons. PID (Packet
Identifier) is a set of numbers that identifies transport stream
packets.
To start service search, select the Start Search item; then a list
box appears, in which found services will be listed. When it
has completed, press the
To stop at any time, or to exit without saving, press the
button.
You can reset all data of the digital receiver. If you want to re-
set all the data, select the Installation
then you will be asked for confirmation. If you select Yes,
service entries, favourite entries and timer events will all be
deleted, and preference options will be reset to the manufac-
turer's factory settings.
NOTE
Doing a factory reset will not delete any recorded items on the
hard disk drive.
button to save found services.
OK
Factory Setting menu,
EXIT