Panasonic PT-53WX53G Service Manual page 129

www.freeservicemanuals.info
29. Perform adjustments for red so that red overlaps green, do not move
green.
30. Press "1 or 3" on the remote until yellow (red and green) and blue
appears, do not move green or red.
31. Perform adjustments so that blue overlaps Yellow (red and green).
32. Press "1 or 3" key on remote to display red, green and blue (white).
33. At this point the crosshatch pattern should look white.
34. If the crosshatch pattern is not only white, repeat adjustment for that
specific color (red or blue).
35. Once the crosshatch pattern looks only white, perform the
adjustments for White only ("POINT", "ORIG. POINT" & "LINE"), notice
that each adjustment must be only for white (red, green,blue)
36. Adjust white for a good line distribution and make lines completely
straight.
37. Press "7" key on remote, then ACTION to save changes.
38. Press POWER then ACTION to exit convergence adjustments (DACs
menu appears).
18.3. Horizontal and vertical size check
1. Apply a pattern that permits to check that horizontal and vertical
proportion of the image is correct
It`s free
69
All over the world