Changing Unit Of Measure; Setting The Time - Mio Move SDC User Manual

04. CHanGInG UnIt Of MeaSUre

The unit of measure for distance and stride length can
be switched between metric and imperial units. The
default is imperial units (miles and inches). To switch:
» In DISTANCE mode, press and hold reSet for 5
seconds. The display will flash the current unit of
measure.
» Press Up to switch the unit of measure.
» Press MODe to exit this setting mode or wait 3
seconds. Pedometer will return to TIME mode.
05. InpUttInG YOUr WeIGHt
Input your personal weight for a more accurate
calculation of calories burned. The default weight value
is 120 lbs.
» In CALORIE mode, press Set. The current weight value
is displayed.
7
» Press Up to increase the weight value. Holding the Up
button will advance the values quickly.
» Once the maximum value is reached (150 kg or 300 lb)
the weight value cycles back to the minimum value
(20 kg or 50 lb).
» To return to CALORIES mode, press Set or MODe.

06. SettInG tHe tIMe

To set the time on your pedometer:
» In TIME mode, press Set. The current hour value
flashes.
» Press Up to adjust the hour value. Holding the Up
button will advance the values quickly.
» Press Set to move to minute value. Use Up to adjust
the value.
» Press Set to return to TIME mode.
» To switch between 12 hour and 24 hour format, press
Up while in TIME mode.
8