Stopwatch Mode - Mio Move SDC User Manual

StOpWatCH MODe

» Displays and runs stopwatch.
» Press Start-StOp to begin timing.
» Press Start-StOp to pause/resume timing.
» Press Start-StOp (same button) to stop timing.
» To reset stopwatch to zero, stop timer and press
reSet.
5
03. SettInG YOUr StrIDe lenGtH
Adjust the stride length the pedometer uses to your
personal stride for a more accurate calculation of
distance travelled. The default stride length is 75 cm or
30 inches.
» In DISTANCE mode, press Set.
» Press Up to increase the stride length value. Holding
the Up button will advance the values quickly.
» Once the maximum value is reached (200 cm or 80 in)
the stride length cycles back to the minimum value
(30 cm or 10 in).
» To confirm value and return to DISTANCE mode, press
Set or MODe.
6