Related Manuals for Aura Allure
Summary of Contents for Aura Allure
- Page 1 Aura Allure with Xena Click & Tan Spray Tanning System Instruction Manual and User Guide...
-
Page 2: Table Of Contents
Aura Allure with Xena Click & Tan Contents 1. Explanation of symbols used ........... . .3 2. -
Page 3: Explanation Of Symbols Used
Indicates tips for use and other particularly useful information. 2. Field of application The Aura Allure with Xena Click & Tan Spray Tanning System has been specifically developed for the application of liquid spray tanning lotion. Any application other than that described in this operating manual is not permitted. - Page 4 Aura Allure with Xena Click & Tan • NEVER leave spray tanning system unattended. • Stay alert and watch what you are doing. • DO NOT operate the unit when fatigued or under the influence of drugs or alcohol. •...
-
Page 5: Description/Scope Of Delivery
Aura Allure with Xena Click & Tan 4. Description/scope of delivery Description (Fig. 1) 1) Air cap /Nozzle 2) Union nut 3) Spray gun 4) Trigger 5) Material volume regulation 6) Air hose 7) ON/OFF switch 8) Air Filter 9) Cable Storage... -
Page 6: Preparation Of The Spray Area
Aura Allure with Xena Click & Tan 7. Preparation of the spray area • Remove all objects from the spray area if possible in order to avoid contamination from overspray. • Work in a room with a smooth, easy-to-clean surface. -
Page 7: Start-Up
Aura Allure with Xena Click & Tan 10. Start-up Before connecting to the mains supply, be sure that the supply voltage is identical with the value given on the rating plate. 1. Unscrew the container from the spray gun. 2. Prepare spray tanning lotion according to manufacturer's instructions and pour into the container. - Page 8 Aura Allure with Xena Click & Tan Disconnect and reconnect the Handle from the Gun Body • Disconnect Handle from Gun Body (Fig. 7, a). While holding the Gun Body, push the bridge (1) upwards, rotate the handle (2) sideways until the arrow on the Handle (3) aligns with the un-lock symbol (4) on the Gun Body.
-
Page 9: Tips On Using The Spray Tanning System
Aura Allure with Xena Click & Tan 12. Tips on using the spray tanning system Before commencing application, check that all necessary protective measures (nasal plugs, safety goggles, hair covering) have been taken. Practice on a large piece of cardboard or paper fi rst of all in order to fi nd the optimal settings for the spray tanning lotion used. -
Page 10: Taking Out Of Operation And Cleaning
Aura Allure with Xena Click & Tan • Prolonged hot baths and showers should be avoided in order to maintain the tanning effect for as long as possible. Daily moisturization of the skin is also recommended. 14. Taking Out of Operation and Cleaning Clean the Spray Tanning System as required, at the end of the working day/ application. -
Page 11: Maintenance
Aura Allure with Xena Click & Tan Assembly 1) Slide the nozzle seal (Fig. 12, 1) with the groove (slot) facing forwards into the nozzle (Fig. 12, 2). 2) Put the nozzle onto the gun body and find the correct position by turning it. -
Page 12: Spare Parts
Aura Allure with Xena Click & Tan 17. Spare parts Spare Parts List (Fig. 15) Pos. Designation Order No. Spray Gun front end 2354 162 Spray gun drying handle 2354 165 Union Nut 2354 166 Air Cap 2354 167 Nozzle... -
Page 13: Correction Of Malfunctions
Aura Allure with Xena Click & Tan 18. Correction of Malfunctions Malfunction Cause Remedy • • No spray tanning Nozzle clogged Clean • • lotion comes out of Material volume setting Turn material volume the nozzle turned too far to the left (-) adjusting screw to the right •... - Page 14 Aura Allure with Xena Click & Tan Malfunction Cause Remedy • • Customer's skin Too much spray tanning Remove spray tanning appears orange lotion applied lotion from the skin • • Skin was not correctly Prepare skin correctly for prepared...
- Page 15 Aura Allure with Xena Click & Tan Malfunction Cause Remedy • • The spray gun is Nozzle may be blocked Remove the 3 part nozzle, leaking from the clean and re-assemble • • nozzle Nozzle not inserted correctly Make sure the indents on...
-
Page 16: Technical Data
Aura Allure with Xena Click & Tan Malfunction Cause Remedy • • The gun is blowing Very little or no solution in Add solution air but spraying no solution container • • solution Blocked nozzle Remove the 3 part nozzle, clean and re-assemble •... -
Page 17: Guarantee
Aura Allure with Xena Click & Tan Guarantee The guarantee runs for two years, counting from the date of sale (sales slip) in case of private use, and 1 year in case of commercial use. It covers and is restricted to free- of-charge rectification of faults which are demonstrably attributable to the use of faulty materials in manufacture, or assembly errors;... -
Page 18: Ec Declaration Of Conformity
Aura Allure with Xena Click & Tan EC Declaration of Conformity We declare under sole responsibility that this product conforms to the following relevant stipulations: 2006/95/EC; 2004/108/EC; 2011/65/EU; 2002/96/EC Applied harmonised norms: EN 60335-1:2012; EN 60335-2-23:2001+A1:2008+A1:2010, EN 62233:2008; EN 55014-1:2006 + A1:2009 + A2:2011; EN 55014-2:1997 + Corrigendum 1997 + A1:2001 + A2:2008;... - Page 19 Aura Allure with Xena Click & Tan...
- Page 20 Aura Allure with Xena Click & Tan J. Wagner GmbH E-Coreco s.r.o. Otto-Lilienthal-Str. 18 Na Roudné 102 D-88677 Markdorf 301 00 Plzeň Hotline 0180 5 59 24 637 +49/ (0) 75 44/ 505-1169 +420 734 792 823 +420 227 077 364 WSB Finishing Equipment Makimport Herramientas, S.L.
Need help?
Do you have a question about the Allure and is the answer not in the manual?
Questions and answers